AK1 4k not working at 60Hz

Please discuss some frequently asked questions here!
Post Reply
Krill
Posts: 2
Joined: Wed Apr 21, 2021 4:36 pm

AK1 4k not working at 60Hz

Post by Krill »

Hi,

Recently bought an AK1 and cannot get it to work at 60Hz, 30 is the maximum it will do.

Am I missing some drivers? It's not the cable or anything else, tested with a different PC to be sure and that works absolutely fine at 60Hz.

Thanks!
User avatar
Gabe
Senior Moderator
Senior Moderator
Posts: 1786
Joined: Fri Apr 17, 2020 1:19 am
Has thanked: 35 times
Been thanked: 85 times

Re: AK1 4k not working at 60Hz

Post by Gabe »

As far as I know, the AK1 isn't capable of 4K at 60, but rather only at 30. I believe the J3455 processor with the HD500 graphics is limited to this.

I'm not positive of the following, but it may be capable of 3840 x 2160 at 60, which is slightly less resolution than the full 4K of 4096 x 2160.
W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10
I have no connection to ACEMAGIC other than being a customer and long time forum member
Krill
Posts: 2
Joined: Wed Apr 21, 2021 4:36 pm

Re: AK1 4k not working at 60Hz

Post by Krill »

Hi, thanks for your response.

Sorry I did mean 3840 x 2160 at 60, but still can't achieve it. Should be able to do it out the box, or do I need to install some drivers?
User avatar
Gabe
Senior Moderator
Senior Moderator
Posts: 1786
Joined: Fri Apr 17, 2020 1:19 am
Has thanked: 35 times
Been thanked: 85 times

Re: AK1 4k not working at 60Hz

Post by Gabe »

I think you should be able to out of the box, but I'm not positive of that. Hopefully the admin or someone else who's done this will reply with advice on what to do.

Edit: I should add that I believe the admin is now off for the weekend, so it may be a couple of days before he replies.
W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10
I have no connection to ACEMAGIC other than being a customer and long time forum member
maleko48
Posts: 23
Joined: Thu Feb 18, 2021 12:11 am
Has thanked: 11 times
Been thanked: 9 times

Re: AK1 4k not working at 60Hz

Post by maleko48 »

Krill wrote: Thu Apr 22, 2021 1:05 pm Hi,

Recently bought an AK1 and cannot get it to work at 60Hz, 30 is the maximum it will do.

Am I missing some drivers? It's not the cable or anything else, tested with a different PC to be sure and that works absolutely fine at 60Hz.

Thanks!
Although the Intel HD Graphics 500 hardware mostly supports 4k60 hardware-based decoding, it only supports 4k60 encoding using H.264. Additionally, 4k60 via HDMI requires HDMI port version 2.0 or greater. Keep in mind, Intel HD Graphics 500 is found in multiple CPU packages, hence the seemingly conflicting specs listed in the documents referenced below. Looking at table 3-9 for the J3455 suggests the CPU package itself only supports 4k30 due to its HDMI v1.4b limitation.

See the spec sheets for your model of Intel CPU here:
https://www.intel.com/content/www/us/en ... urces.html

The HD Graphics 500 contained within the Intel Celeron J3455 CPU support the following:
149___chrome___334817_APL_Datasheet_Volume1.pdf_-_Google_Chrome.png
149___chrome___334817_APL_Datasheet_Volume1.pdf_-_Google_Chrome.png (227.48 KiB) Viewed 2812 times
150___chrome___334817_APL_Datasheet_Volume1.pdf_-_Google_Chrome.png
150___chrome___334817_APL_Datasheet_Volume1.pdf_-_Google_Chrome.png (65.64 KiB) Viewed 2812 times
151___chrome___334817_APL_Datasheet_Volume1.pdf_-_Google_Chrome.png
151___chrome___334817_APL_Datasheet_Volume1.pdf_-_Google_Chrome.png (196.54 KiB) Viewed 2812 times
User avatar
Gabe
Senior Moderator
Senior Moderator
Posts: 1786
Joined: Fri Apr 17, 2020 1:19 am
Has thanked: 35 times
Been thanked: 85 times

Re: AK1 4k not working at 60Hz

Post by Gabe »

I just found this on Amazon's page for the AK1.

Screen Shot 2021-04-23 at 7.22.44 PM.png
Screen Shot 2021-04-23 at 7.22.44 PM.png (19.05 KiB) Viewed 2803 times
W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10
I have no connection to ACEMAGIC other than being a customer and long time forum member
Post Reply

Return to “FAQ”