T11 doesn't turn on no led power supply works normal

Post by **xrekk** » Mon Apr 12, 2021 6:46 pm

2 weeks ago i got the T11. i used it 1 week when moved it to my bedroom connected it to my TV. it does nothing and tested the power supply with a multi meter it dilivers the power correctly the led of the computer doesnt light up if i press the button.

Post by **witt** » Tue Apr 13, 2021 1:12 am

Hello,
there is no problem with the power adapter. You can try pressing the reset button with the needle for ten seconds. If this method does not solve the problem, you need to open the lid, remove the button battery, and then open it after a short circuit. If it can be turned on normally, please insert the BIOS battery. If it cannot be solved, it is recommended to contact after-sales solution

Post by **Magtek1** » Sun Nov 07, 2021 2:30 pm

I have the same problem but my T11 has no reset button on the outside. The red light stays on. Earlier it was switching red to blue.
Any suggestions?

Post by **Gabe** » Sun Nov 07, 2021 4:57 pm

Magtek1,

You should try a BIOS discharge, the instructional video for which is below...

Post by **Magtek1** » Tue Nov 09, 2021 4:23 am

Thank you but I have already tried that.

Best Minipc Forum

Thanks for visiting and welcome to register and communicate with mini PC enthusiasts around the world.