DDR5-5600 Memory Upgrade

Post by **davidfi01** » Fri Apr 26, 2024 9:36 pm

What BIOS settings need to be changed so that the system will run newly installed Crucial DDR5-5600 1.1v CL46?

Please advise.

D

Post by **dragonpoo** » Fri Apr 26, 2024 10:09 pm

It sounds like you've already installed the memory, and it's not recognised? Not booting? But you're able to get into the BIOS? What have you tested so far?

As I don't have one of these models, I can't advise on specific settings. Barry posted a video walkthrough of a RAM upgrade here: viewtopic.php?t=4925 and based on what they tested, it was 2x32GB Crucial DDR5-4800 1.1V CL40 (www.amazon.com/Crucial-2x32GB-4800MHz-L ... B09S2QLBWC). Intel's Ark site says the 125H and 155H should support up to 5600, but that doesn't mean they were tested or will work.

Post by **Gabe** » Sat Apr 27, 2024 2:53 am

It shouldn't require any BIOS changes. Is it not working properly?

Post by **davidfi01** » Sat Apr 27, 2024 3:23 am

The memory is installed, the machine boots, but it only runs at 4800, not 5600. It seems that the bios is locked at 4800 or must manually be set to run 5600. I can't turn on any XMP profiles either. This should be really simple to do, but, it's not.

: Screenshot 2024-04-26 233229.png (223.6 KiB) Viewed 546 times

You can see in taskman that memory is running at 4800 with 5600 installed and read by CPU-Z.

Post by **barry777** » Sun May 05, 2024 8:17 am

davidfi01 wrote: ↑Sat Apr 27, 2024 3:23 am The memory is installed, the machine boots, but it only runs at 4800, not 5600. It seems that the bios is locked at 4800 or must manually be set to run 5600. I can't turn on any XMP profiles either. This should be really simple to do, but, it's not.

Screenshot 2024-04-26 233229.png

You can see in taskman that memory is running at 4800 with 5600 installed and read by CPU-Z.

I have sent it to a private message, please check the private message.

Post by **davidfi01** » Sun May 05, 2024 2:12 pm

Thanks Barry.

D

Post by **dragonpoo** » Mon May 06, 2024 5:05 pm

If there's any resolution to this, be sure to share in case somebody else comes to the forums looking for a similar solution.

Post by **davidfi01** » Mon May 06, 2024 10:40 pm

Yes - an update to the bios allows for 5600. PM Barry.

D

Post by **dragonpoo** » Mon May 06, 2024 11:27 pm

davidfi01 wrote: ↑Mon May 06, 2024 10:40 pmYes - an update to the bios allows for 5600. PM Barry.

D

Awesome! I'd do a "thank" but it appears that's not available for these forums, so take my emoji instead:

Best Minipc Forum

Thanks for visiting and welcome to register and communicate with mini PC enthusiasts around the world.