Unrecognized after installing 2.5-inch hard disk

[admin]

Here take T11 as an example
1. 1. Check whether the hard disk is in good contact. It is recommended to reinstall the hard disk to ensure that the hard disk is in good contact.

Step1.jpg (60.46 KiB) Viewed 2885 times

2. The new hard disk needs to be partitioned. Consult the customer for a new / old hard disk.
A. Right-click to start-Disk Management

Step2.jpg (84.71 KiB) Viewed 2885 times

Step3.jpg (129.38 KiB) Viewed 2885 times

B. Use Disk Tool "PartitionGuru" to Partition the Hard Disk
Download: https://mega.nz/#!sg42HADQ!5ytaIxdmY00I ... iFKR_4N14A

Step4.jpg (93.45 KiB) Viewed 2885 times

Step5.jpg (139.66 KiB) Viewed 2885 times

3. Used hard drives are not recognized
A.To troubleshoot hard disk damage, it is recommended to try a normal hard disk to see if the identification is normal.
B. If it cannot be identified, open the disk tool “PartitionGuru” and detect the hard disk repartitioning (see the above three pictures), and the PC can recognize (or reassign the drive letter). If the normal hard disk software cannot be detected, the PC function is bad (after-sales process)

Step6.jpg (79.34 KiB) Viewed 2885 times

[Nicholas]

It is common sense that new hard disks need to be partitioned.