T11 Will not switch on Red and Blue Light

Post Reply
Jlstacey2001
Posts: 2
Joined: Wed May 31, 2023 6:29 pm

T11 Will not switch on Red and Blue Light

Post by Jlstacey2001 »

Hi

My T11 will not switch on? I just get a red and then blue light flash but nothing happens.
User avatar
Gabe
Senior Moderator
Senior Moderator
Posts: 1730
Joined: Fri Apr 17, 2020 1:19 am
Has thanked: 33 times
Been thanked: 79 times

Re: T11 Will not switch on Red and Blue Light

Post by Gabe »

I would suggest trying a BIOS discharge. Unfortunately, there is no video for the procedure with the T11, but if you know how to take the unit apart the procedure itself, as in what you need to do with the battery terminals, would be the same as with other models, like in the following video for the AK3. Make sure everything is disconnected from the unit when you do this, including the power.

W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10
I have no connection to ACEMAGIC other than being a customer and long time forum member
Jlstacey2001
Posts: 2
Joined: Wed May 31, 2023 6:29 pm

Re: T11 Will not switch on Red and Blue Light

Post by Jlstacey2001 »

Thank. I gave it a go but still won’t switch on. I did notice a high pitch noise though that I wasn’t getting before.
User avatar
Gabe
Senior Moderator
Senior Moderator
Posts: 1730
Joined: Fri Apr 17, 2020 1:19 am
Has thanked: 33 times
Been thanked: 79 times

Re: T11 Will not switch on Red and Blue Light

Post by Gabe »

Jlstacey2001 wrote: Wed May 31, 2023 9:33 pm Thank. I gave it a go but still won’t switch on. I did notice a high pitch noise though that I wasn’t getting before.
In that case I'd contact after sales support at support@kamrui.com. Depending on its age, however, there may not be much they could do with it, but it's still worth a shot.
W8 Pro • GK1 • AK3 • AM02 • T6 Pro • AMR5 • GK3 Pro • AD03 • AM06 Pro • T8 Pro • S1 • T8 Plus • CK10
I have no connection to ACEMAGIC other than being a customer and long time forum member
Post Reply

Return to “Z8350(T11)”